Subscribe

Sign up for free

  • Get quick access to your favorite articles

  • Manage alerts on breaking news and favorite drivers

  • Make your voice heard with article commenting.

Autosport Plus

Discover premium content
Subscribe
Formula 1 Australian GP

The glowing light that offered clues about Mercedes’ F1 recovery plan

Eagle-eyed observers of Formula 1's Australian Grand Prix could not help but notice a strange glowing light coming from beneath Lewis Hamilton's car at points of the race on Sunday.

Lewis Hamilton, Mercedes W13

Photo by: Carl Bingham / Motorsport Images

Giorgio Piola's F1 technical analysis

Giorgio Piola is the preeminent Formula 1 technical journalist. Born in Genoa, Italy, Giorgio has covered the F1 World Championship since 1969, producing thousands of illustrations that have been reproduced in the world’s most prestigious motor racing publications.

But rather than this being some funky idea for his W13 to look better, the light was actually a working sensor, and the result of the ongoing push by Mercedes to get to the bottom of its porpoising problems.

Mercedes believes that if it can understand what's needed to stop its 2022 F1 car bouncing on the straights, then that can help it run it in a better set-up window, which will deliver an automatic step forward in performance.

The difficulty is that so far Mercedes has not yet got to the bottom of the triggers for the porpoising, and exactly what are the factors that cause the phenomenon to appear.

Mercedes team boss Toto Wolff admitted that there were some hidden "gremlins" with the car that needed to be found, and things were especially confusing because no matter what set-up changes were made over the Melbourne weekend, they appeared to have little impact on the problem.

The porpoising appears to be less frequent in the races, and in a bid to try to comprehend why that is, Mercedes elected to keep on an optical rideheight sensor for the duration of the Australia weekend on Hamilton's car.

Lewis Hamilton, Mercedes W13

Lewis Hamilton, Mercedes W13

Photo by: Motorsport Images

The sensor, which emits a light when switched on, measures the ride height and the car's trajectory in relation to the track, so can be used to deliver answers on what exactly is happening on straights and in corners.

These devices are quite commonly used in F1, but normally are only fitted in free practice sessions because they do add extra weight to the car, believed to be somewhere between 1kg and 2kg.

Mercedes felt, however, that the benefits of keeping it on the car for qualifying and the race for the extra knowledge gained, would outweigh any downside in having extra ballast.

As Lewis Hamilton explained to Sky Sports F1: "I've got something on my car that makes it a little bit heavier, but it's not a huge, huge step. Hopefully it will enable the team gain more information in the race."

But the light sensor was not the only data gathering exercise Mercedes conducted, as during some of its free practice runs, it added further optical rideheight sensor housed within pods on the edge of the floor.

Mercedes W13 side detail

Mercedes W13 side detail

Photo by: Mark Sutton / Motorsport Images

The quest to get answers on its porpoising means that Mercedes has put a push for upgrades on the backburner: as it does not want to confuse matters by changing its car configuration just yet.

That is why the team has not yet introduced a bespoke low downforce rear wing – as it still continues to use a modified version of the high downforce wing it started the season with.

With the porpoising issues still its priority, it has focused more efforts on race pace – knowing that Ferrari and Red Bull are out of reach on Saturdays for now.

Mercedes W13 rear wing
Mercedes W13 rear wing Saudi Arabian GP

The work being undertaken by Mercedes is incredibly intense, as not only is it trying to find the performance sweet spot, but it is also switching between set-ups both mechanical and aerodynamic.

This was evidenced by Hamilton and George Russell switching between a rear wing set-up with and without the trailing edge Gurney flap (above), while also actively pushing the car in a direction that's worsening the porpoising issues in order to collect data and better understand how to deal with it.

Be part of the Autosport community

Join the conversation
Previous article ‘Nothing substantial’ coming for Mercedes soon, says Russell
Next article How Albon pulled off a strategy miracle in Australian GP

Top Comments

There are no comments at the moment. Would you like to write one?

Sign up for free

  • Get quick access to your favorite articles

  • Manage alerts on breaking news and favorite drivers

  • Make your voice heard with article commenting.

Autosport Plus

Discover premium content
Subscribe