How F1 teams have tried to cut back on drag in Baku

The Baku City Circuit represents a unique challenge for the teams, given the opposing requirements on downforce levels for the different parts of the track.

How F1 teams have tried to cut back on drag in Baku

A variety of solutions will be in play this weekend but teams will likely settle on the lowest downforce setup they can get away with, ensuring that they are not penalised on the long main straight that includes the start/finish line.

Most have brought new low downforce front and rear wing solutions, while the general development war continues to rage too.

Here’s what the teams have reported as being new for the event:

Mercedes

Mercedes W13 rear wing

Mercedes W13 rear wing

Photo by: Giorgio Piola

Mercedes W13 front wing detail

Mercedes W13 front wing detail

Mercedes has brought lower downforce front and rear wings, with smaller chord and reduced angle of attack flap elements for the front wing (note how the trailing edge of the upper flap has been cut away), while the upper elements of the rear wing take up less space in the allowable box section.

Mercedes W13 mirror detail

Mercedes W13 mirror detail

The team has also added a lower deflector beneath the side-impact system fairing (red arrow), which is loosely described as being part of the mirror stay structure but has more to do with helping to correct the direction of any localised flow that’s moving around the sidepod.


Red Bull

Red Bull Racing RB18 floor

Red Bull Racing RB18 floor

Red Bull Racing RB18 diffuser

Red Bull Racing RB18 diffuser

Photo by: Giorgio Piola

Red Bull had already modified its front brake and caliper arrangement for Monaco and has made further changes in Baku to improve cooling. Meanwhile, to help with the additional loads that the floor will sustain, the team has added an external wire to better support the section ahead of the rear tyre.

It has also altered the fillet radius of the floor surface to expose the fences in pursuit of local load, which has resulted in changes on the floors edge to further optimise performance across the board.

Interestingly, and not noted by Red Bull in the report, is the switch to a single beam wing element, as it looks for ways to reduce drag without dramatically compromising downforce.


Ferrari

Ferrari F1-75 rear wing detail

Ferrari F1-75 rear wing detail

Ferrari F1-75 mirror

Ferrari F1-75 mirror

Photo by: Giorgio Piola

Originally intended that it would have been its first outing in Miami, Ferrari has installed a rear wing with what it describes as having ‘de-powered’ wing profiles to better suit the peculiarities of the Baku layout.

A new wing mirror layout is also being used on the F1-75 this weekend, which is a general development and not one specific to Baku. The redesign features a new inboard section with an abrupt vertical and horizontal interaction, rather than a gentle curvature, to improve the airflow's path downstream.


McLaren

McLaren MCL36 rear wing

McLaren MCL36 rear wing

Photo by: Giorgio Piola

McLaren MCL36 front wing detail

McLaren MCL36 front wing detail

There is a new rear wing design for McLaren to cater for the demands of the circuit, while a front wing flap has been developed to provide the appropriate balance adjustment range for the lower downforce rear wing assembly.

McLaren MCL36 rear end detail

McLaren MCL36 rear end detail

Changes have also been made to the rear bodywork around the sidepods and engine cover in terms of cooling, with a reduced outlet size resulting in reduced drag.


Alpine

Alpine A522 rear wing

Alpine A522 rear wing

Photo by: Giorgio Piola

Alpine A522 side detail

Alpine A522 side detail

Photo by: Giorgio Piola

Alpine has a number of items on the A522 that target drag reduction, including a revised front wing design and a more tailored rear wing design that not only reduces the size of the elements in the upper bounding box, but also the size and shape of the beam wing elements.

In one of the more interesting changes that is not circuit specific, Alpine has revised the shape of the forward section of the sidepod.

This now boxier inlet design, which is a design similar to what has already been used by Aston Martin and AlphaTauri, pushes the bodywork further forward meaning the airflow is not only captured faster by the inlet, it will also deal with the wake created by the front tyre sooner.


AlphaTauri

AlphaTauri AT03 rear end detail

AlphaTauri AT03 rear end detail

The AT03 has been furnished with a new rear wing assembly for Baku, which features a new beam wing layout to both increase downforce while reducing drag.

As a consequence, the front wing has new rearward elements to reduce their chord length and incidence level to help balance the car. The position of the rearward cooling louvre panel has been changed, and arches down around the engine cover.


Alfa Romeo

Alfa Romeo C42 front wing

Alfa Romeo C42 front wing

Alfa Romeo C42 rear wing

Alfa Romeo C42 rear wing

The C42 has a new, reprofiled low-drag rear wing designed to complement the team's medium-drag package, which is in response to the characteristics of the circuit.

In tandem, the upper two elements of the front wing have also been revised, with the elements trimmed and angled according to the balance required.


No major updates elsewhere

Aston Martin, Williams and Haas have not reported the use of any new components, although Haas has trimmed the trailing edge of their rear wing’s upper flap back considerably in an effort to reduce drag.

Haas VF-22 garage

Haas VF-22 garage

shares
comments
F1 Azerbaijan GP: Perez quickest in FP1 over Leclerc, Verstappen third
Previous article

F1 Azerbaijan GP: Perez quickest in FP1 over Leclerc, Verstappen third

Next article

F1 Grand Prix practice results: Leclerc fastest in Azerbaijan GP on Friday

F1 Grand Prix practice results: Leclerc fastest in Azerbaijan GP on Friday
The inconvenient truth about F1’s ‘American driver’ dream Plus

The inconvenient truth about F1’s ‘American driver’ dream

OPINION: The Formula 1 grid's wait for a new American driver looks set to continue into 2023 as the few remaining places up for grabs - most notably at McLaren - look set to go elsewhere. This is despite the Woking outfit giving tests to IndyCar aces recently, showing that the Stateside single-seater series still has some way to go to being seen as a viable feeder option for F1

How a bad car creates the ultimate engineering challenge Plus

How a bad car creates the ultimate engineering challenge

While creating a car that is woefully off the pace is a nightmare scenario for any team, it inadvertently generates the test any engineering department would relish: to turn it into a winner. As Mercedes takes on that challenge in Formula 1 this season, McLaren’s former head of vehicle engineering reveals how the team pulled of the feat in 2009 with Lewis Hamilton

Formula 1
Aug 15, 2022
The under-fire F1 driver fighting for his future Plus

The under-fire F1 driver fighting for his future

Personable, articulate 
and devoid of the usual
 racing driver airs and graces,
 Nicholas Latifi is the last Formula 1 driver you’d expect to receive death threats, but such was the toxic legacy of his part in last year’s explosive season finale. And now, as ALEX KALINAUCKAS explains, he faces a battle to keep his place on the F1 grid…

Formula 1
Aug 13, 2022
The strange tyre travails faced by F1’s past heroes Plus

The strange tyre travails faced by F1’s past heroes

Modern grand prix drivers like to think the tyres they work with are unusually difficult and temperamental. But, says  MAURICE HAMILTON, their predecessors faced many of the same challenges – and some even stranger…

Formula 1
Aug 12, 2022
The returning fan car revolution that could suit F1 Plus

The returning fan car revolution that could suit F1

Gordon Murray's Brabham BT46B 'fan car' was Formula 1 engineering at perhaps its most outlandish. Now fan technology has been successfully utilised on the McMurtry Speirling at the Goodwood Festival of Speed, could it be adopted by grand prix racing once again?

Formula 1
Aug 11, 2022
Hamilton's first experience of turning silver into gold Plus

Hamilton's first experience of turning silver into gold

The seven-time Formula 1 world champion has been lumbered with a duff car before the 2022 Mercedes. Back in 2009, McLaren’s alchemists transformed the disastrous MP4-24 into a winning car with Lewis Hamilton at the wheel. And now it’s happening again at his current team, but can the rate of progress be matched this year?

Formula 1
Aug 11, 2022
Why few could blame Leclerc for following the example of Hamilton’s exit bombshell Plus

Why few could blame Leclerc for following the example of Hamilton’s exit bombshell

OPINION: Ferrari's numerous strategy blunders, as well as some of his own mistakes, have cost Charles Leclerc dearly in the 2022 Formula 1 title battle in the first half of the season. Though he is locked into a deal with Ferrari, few could blame Leclerc if he ultimately wanted to look elsewhere - just as Lewis Hamilton did with McLaren 10 years prior

Formula 1
Aug 9, 2022
The other McLaren exile hoping to follow Perez's path to a top F1 seat Plus

The other McLaren exile hoping to follow Perez's path to a top F1 seat

After being ditched by McLaren earlier in his F1 career Sergio Perez fought his way back into a seat with a leading team. BEN EDWARDS thinks the same could be happening to another member of the current grid

Formula 1
Aug 8, 2022